Fiberglass production tooling
Built for the part. Not pulled off a shelf.
Custom fiberglass molds shaped around your geometry, your process, and the point where your project actually starts.
Custom molds / patterns / design supportThe work
A production mold starts before the first layer goes down.
The useful work begins with the part geometry, the intended manufacturing process, and a clear definition of what the customer needs back.
Prestige can take on the finished fiberglass mold, the pattern or master work that leads to it, and the design coordination needed when the starting information is not ready for the shop.
Project starting points
We can begin before everything is figured out.
- 01Production-ready CAD
- 02Basic geometry or drawings
- 03A physical part to work from
- 04An existing pattern, master, or plug
- 05An existing mold that needs review
- 06An early product concept
The first conversation is about the starting point and the required output—not forcing the job into a canned package.
Construction that follows the job
Every Layer Has a Job to Do
Fiberglass production tooling uses a gelcoat tooling surface. That construction detail matters, but it is not a separate customer-facing product. Prestige keeps the conversation focused on the mold you need built.
A practical sequence
From information to physical tooling.
Every job has different technical details. The basic decisions should still be easy to follow.
- 01
Understand the part
What are you making, what do you have now, and what physical output does your production team need?
- 02
Set the geometry path
Prestige can work from supplied geometry or help manage the design and pattern development needed first.
- 03
Build the mold scope
The agreed pattern and mold construction move forward with the end manufacturing process in view.
- 04
Hand off real tooling
The result is the physical mold scope your shop is prepared to put to work.